Yamaha N12 12-Channel Digital Mixer with Firewire Interface

The Yamaha N12 Digital Mixing Studio is a mixing console with an analog-like mixing interface which boasts ease of operation for professional quality The mixer can handle up to 12 analogue channel inputs, mixing them to stereo outputs and the 16 in/out FireWire connection to record them in a DAW. Ea For monitoring purposes you can connect three monitoring speakers (each stereo) to the mixer. If a computer is connected to the N12, you can monitor t With Cubase AI 4 a special version of Cubase 4 is included in the package so that you are ready to plug in and record. Ease of operation Analog-like mixing interface enables you to bring your sonic imagery into reality. The mixer can handle up to 16 channel inputs mixing them to stereo Computer connection via a single IEEE 1394 cable A single cable can do the trick. Connect a computer with an IEEE 1394 port to the N12 using an IEEE 1394 cable to transfer audio and MIDI signals betw Link with Cubase Install Cubase 4 (Cubase 4, Cubase Studio 4, or Cubase AI 4) on the computer, and the N12 will link to Cubase and operate together seamlessly. For exa High end sound Mono channelstrip N12 Based on the examination of existing head amp circuits, a new head amp circuit has been developed that provides higher quality a The Input Select switch determines whether the analogue input signal or the DAW signal (the output from Cubase or another DAW) will be routed to the c Newly developed compressor The N12 includes a newly developed compressor that adopts Sweet Spot Morphing technology. The mixer provides various compressor presets that represent Three-band EQ on each channel Each input channel features a full 3-band (high/mid/low) equalizer, providing easy sound shaping to suit your preferences. The Mid band is semiparamet Digital reverb at your service A built-in digital reverb can be shared by all input channels. If a computer is connected to the mixer, you can also apply digital reverberation to ou Use Aux Send 1 to route the channel's signal to the Aux bus. Use this control when you are sending a mix monitoring signal to the musicians, or connec The Pan control determines the stereo position of the monaural input channel. Stereo Input channels feature a Balance control which determines the vol Soloing an muting The Solo switch turns the Solo function on and off. Turn this switch on, if you want to listen to certain channels without changing the mix contents o Use the On switch to turn each channel on and off (muting). When the switch is turned off, the channel signal will be sent only to the AUX bus. Fader controls Each input channel features a 100mm fader volume control, each equipped with a input meter consisting of four LEDs. Use the REC and the ST switches to route the channels signal either to the recording bus and/or the stereo bus. With the Wet Switch you can determine if you want to hear the dry input signal from the analog input of the channel or the wet signal coming back from Control Room monitoring function The N12 features a monitoring function dedicated to the Control Room (Control Room Monitor function). You can connect three monitoring speakers (A, B, Use the Dimmer switch to temporarily lower the monitoring volume without readjusting the control room volume level - for instance if you want to have The Talkback switch activates the built in microphone so that you can talk to the recording artist listening to the monitor signal in the recording ro DAW remote control function DAW Control N12 This section features switches to remotely control the basic functions of the DAW software connected to the N12. Transport controls, t The N12 supports three different modesof the way it works together with the connected DAW: In the Stereo Mix mode the N12 will monitor the Stereo Outp  more