Yamaha Audio Mixers

?Yamaha MG102C Stereo Mixer: $99.00Not a bad investment in your music career, whether you need a compact main mixer or a secondary utility mixer for larger applications.? If you need a convenient analog mixer that can handle up to 10 input sources and deliver pro-level sound, Yamahas MG-series mixers cover a wide range of applications from solo home recording to complex live sound with no compromises in sonic quality, processing versatility, or dependability.For one or multiple mics, garage band jam to quiet at-home acoustic, this small but sophisticated mixer also features Yamahas innovative 1-knob compressor for built-in dynamics control that further eliminates the need for external equipment and potentially troublesome connections.Yamaha MG102C 10-Channel Stereo Mixer Specs: 10-input 2-bus design 2 mic mono 2 mic/line stereo 2 line stereo channels 2 channels of single-knob compression 3-band EQ on mic input channels Microphone stand mountable (requires BMS-10A) 4 high-performance microphone preamplifiers with switchable phantom power Built-in channel compressors 3-band channel EQ and high-pass filter effect/aux sends Bright meters for visual level monitoring Lightweight, portable design (1.5 kilograms) and easy operation Frequency Response: STEREO OUT, EFFECT SEND (AUX SEND*), MONITOR OUT, REC OUT GAIN: min (CH 1/5/6) 20Hz 20 Hz Nominal output level @ 1kHz: -3.0 1.0 dB Total Harmonic Distortion (THD + N) STEREO OUT, +14 dBu @ 20 Hz-20 kHz, Input GAIN Control at minimum : 0.1%Hum amp; Noise: CH INPUT 1,2 MIC, EIN (Equivalent Input Noise): Rs = 150 Ohms, GAIN: maximum (CH. 1, 2): -128 dBu STEREO OUT, STEREO Master control at nominal level and all channel Level controls at minimum: -87 dBu EFFECT SEND (AUX SEND), all CH. EFFECT (AUX) controls at minimal: 85 dBu STEREO OUT, STEREO Master Control and one CH fader at nominal level (Ch1,2) : -64 dBu STEREO OUT Residual Output Noise 100 dB Crosstalk (1 kHz): Adjacent Input CH 1, 2: -70 dB; Input to Output STEREO L/R, CH 1-2, PAN: panned hard left or right: -70 dB Phantom Voltage MIC: + 48V Input HPF: CH 1-5/6, 80 Hz, 12 dB/oct Input equalization CH 1-5/6 HIGH: 10 kHz (shelving), MID: 2.5 kHz (peaking), LOW: 100 Hz (shelving); CH 7/8, 9/10 HIGH: 10 kHz (shelving), LOW: 100 Hz (shelving) PEAK Indicator: Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for CH 3/4, 5/6) reaches -3 dB below clipping (+17 dBu). Internal Digital Effect : 16 PROGRAM, PARAMETER control, Foot Switch (Digital Effect On/Off) LED Level Meter, Pre MONITOR Level, 2 x 7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB), PEAK lights if the signal level reaches 3 dB below the clipping level. Power Supply Adaptor PA-10: AC 35 VCT, 0.62 A, Cable Length = 3.6 m Power Consumption: 21 W Dimensions (W x H x D): 10.10 x 2.4 x 11.9 (256.6 mm x 62.2 mm x 302.5 mm) Net Weight: 3.4 lbs (1.5 kg)Get free shipping at SameDayMusic.com on purchases over $89.? No code required.Find at Smarter.com:? Shop for more audio mixers. ... more